Post-Construction Carpet Cleaning · Nashville

Move In Fresh — Post-Construction Carpet Cleaning in Nashville

Construction dust sinks into carpet pile where regular final cleans never reach. Punchlist extracts it — and lifts the paint drips and adhesive spots too — so every handover walks like a finished home.

24-hour turnaround from flooring-done14 builders on standing programsZero closings missed on our line
a newly renovated living room with fresh paint and new carpet
fine white dust covering a floor during home renovation
The Dust Problem

Drywall Dust Doesn't Vacuum Out

Sanded drywall compound is finer than flour. It hangs in the air for days after the trades leave, settles into brand-new carpet, and works its way below the pile surface where shop vacs and rental machines simply can't reach. Then the buyers move in, the HVAC kicks on, and the 'new' carpet exhales gray haze for months. Punchlist exists for exactly this: high-airflow truck-mounted extraction that pulls construction dust out of the backing, not just off the top.

  • Silica-fine dust settles below the pile surface
  • Shop vacs and rentals only skim the top
  • Truck-mounted airflow extracts from the backing
  • One pass, and the carpet stops exhaling gray
Built for Job Sites

A Crew That Speaks Construction

Scheduled Off Your Closing Calendar

We slot in behind flooring and ahead of the blue-tape walk — and we move when your schedule moves.

Job-Site Ready

OSHA-aware crews, PPE as required, GC check-in on arrival, and badges for gated communities.

Paint & Adhesive Response

Latex drips, carpet-tape residue, and overspray lifted with solvent methods that don't halo.

Dry Before the Walk

Air movers run as we finish — carpet is dry before the designer, the agent, or the buyer sees it.

COIs on File

Insurance certificates and vendor packets filed with your office before the first lot.

Per-Lot Flat Pricing

Priced by floor plan, invoiced per lot or per month — your accounting picks the format.

The Sequence

Where We Land in Your Build

1

Flooring Signs Off

Carpet's in, trades are out. Your super texts the lot number — that's the whole handoff.

2

We're In Next Morning

Crew arrives inside 24 hours, checks in with the super, and protects finished surfaces on the way in.

3

Extract, Spot, Groom

Full-airflow dust extraction, paint and adhesive spot response, then pile groomed for the photos.

4

Walk-Ready Same Day

Dry by afternoon, documented with photos, and the punch list gets one more line crossed off.

1,900+Handover Cleans Completed
24 hrFrom Flooring-Done to Dust-Free
14Builders on Standing Programs
0Closings Missed on Our Line
Builders & GCs

Put Us on the Punch List, Permanently.

Standing programs get per-lot flat pricing, 24-hour turnaround from flooring sign-off, and a crew your supers already know.

a new house under construction with wooden framing
For Builders

Fourteen Builders Trust Us With Their Closings

A carpet clean sounds like a small line item until it slips — then it's a delayed walk, a rescheduled closing, and a buyer's first impression ruined by gray traffic lanes. Punchlist runs standing programs for fourteen Middle Tennessee builders because we treat the schedule like the product: your super texts a lot number when flooring signs off, we're in within 24 hours, and the house walks clean. Per-lot flat pricing means your estimators can book the cost before the slab is poured.

  • Text-a-lot-number scheduling, nothing formal
  • 24-hour standard from flooring sign-off
  • Per-lot flat rates estimators can plan on
  • Photo documentation for every handover
Scope of Work

Every Final Clean Includes

HEPA pre-vacuum pass

The heavy surface dust captured before wet extraction, not smeared by it.

Full-airflow truck-mounted extraction

The deep pull that gets silica-fine dust out of the backing.

Paint, adhesive & overspray response

Standard spots lifted as part of the clean — flagged first if anything needs specialty solvent.

Edge & closet detail

The corners the blue-tape walk always checks.

Pile grooming

Carpet set upright and uniform — the showroom look the listing photos need.

Photo documentation

Every room shot after cleaning, filed by lot number, sent same day.

Questions

Asked From Job Sites & Reno Projects

Why isn't the builder's regular final clean enough?

Construction cleans handle surfaces — counters, glass, floors you can mop. Carpet is different: drywall dust migrates below the pile surface where upright vacuums can't pull it back out. Only high-airflow extraction reaches the backing, which is why 'cleaned' new carpet often hazes gray within weeks of move-in.

How fast can you turn a lot?

24 hours from flooring sign-off is the program standard, and same-day happens weekly. A typical production home takes one crew half a day, dry by late afternoon.

Can you get paint out of new carpet?

Usually, yes — fresh latex almost always, dried latex most of the time, oil-based depends on the fiber. We test a hidden spot first and tell you the odds honestly before working. The earlier you call, the better the result.

Do you work with homeowners, or just builders?

Both. About half our work is builder programs; the other half is homeowners finishing renovations who want the dust actually gone. Same crews, same equipment, same 24-hour scheduling.

What does per-lot pricing look like?

Flat rates by floor plan, set once for your whole community — so a 2,400 sq ft plan costs the same on lot 14 as lot 40. Estimators love it, and there are no surprises when a closing moves up.

Which areas do you cover?

Metro Nashville and the growth ring: East Nashville, The Nations, Germantown, Franklin, Brentwood, Mt. Juliet, Hendersonville, and Murfreesboro. Building further out? Programs travel — ask.

Get on the Schedule

Builders: send the community and closing rhythm. Homeowners: tell us about the project. Either way, we reply with dates within one business day.

Get on the Schedule