Licensed, bonded and insured — CO Lic #SV-2274Our own crew and equipment, never a subcontractorFree site survey before we quote the install
Safe & Vault Installation · Colorado Springs, CO

Gun Safe Installation in Colorado Springs, CO

Bolted down and bolted right. A safe that is not anchored is a heavy box a thief can wheel out. We survey the floor, move it in, and bolt it to the structure — then show you exactly what is holding it.

a brass combination dial on a heavy safe door
22Years Installing Safes
3,100+Safes Delivered & Anchored
1,400 lbHeaviest Unit We Have Set
5.0★From 200+ Reviews
a heavy duty hand truck standing ready in the workshop
Twenty-Two Years On The Front Range

We Install Safes. That Is The Whole Job.

Talmadge is not a locksmith who also delivers safes. Installing and servicing them is all we do, which is why we own the stair climbers, the rigging plates and the floor protection rather than renting whatever is available that week. Every job starts with a survey — the route in, the turn at the landing, the floor under it — because the expensive mistakes all happen before anything is lifted.

Before You Buy

Four Things Worth Checking First

Most of the trouble we get called to fix was decided at the point of purchase.

Weight Versus Floor

A loaded gun safe on an upper floor is a structural question, not a preference. We will tell you before it is in the truck.

The Route In

Door widths, stair turns and ceiling height decide what is possible. A tape measure now saves a return trip later.

Damp And Basements

Concrete wicks moisture. A safe set straight on a slab without a break will rust from underneath.

How It Anchors

Anchor holes are not all in useful places. Check yours line up with something solid before you commit.

Why Talmadge

What You Get That A Delivery Van Does Not

A Survey Before A Quote

We come out and look. The price you get accounts for your stairs, your floor and your doorways rather than an average.

Our Own Crew

The people who quote the job are the people who do it. Nothing is handed to a subcontractor who has never seen the house.

Anchoring Shown To You

When we finish we walk you around the unit and show you every fixing, what it is into, and how to check it in a year.

We Come Back

Combination changes, a sticking bolt, a dead keypad battery — we service what we install for as long as you own it.

How It Works

Survey, Quote, Install, Show

1

Free Site Survey

We measure the route, check the floor and talk through where the safe should actually live.

2

A Fixed Quote

One number covering delivery, rigging, anchoring and protection. No day-of surprises.

3

Installation Day

Floors and doors protected, unit routed in, anchored to your structure and levelled.

4

Walkthrough

We set your combination with you, show you the fixings, and leave the paperwork.

a cordless drill and a tray of masonry fixings ready for an anchor install
Anchoring

An Unanchored Safe Is A Heavy Box On Wheels

Thieves do not open safes in the house. They tip them onto a dolly and open them somewhere quiet with time and tools. Every gun safe leaves the factory with anchor holes in the base for exactly this reason, and a startling number are never used. Anchoring is the cheapest part of the whole purchase and the part that decides whether the safe is doing its job.

Who We Work With

Homes, Ranges, Dealers And Businesses

Private Homes

Single gun safes, closet installs, basement and upper-floor placements across the Front Range.

Firearms Dealers

Overnight storage units, display case locking and end-of-day vault routines that staff will actually follow.

Businesses

Cash safes, drop safes and depository units for retail, hospitality and dispensary clients.

Safe Rooms

Vault doors hung into framed openings, plumbed and swinging true, with egress hardware inside.

What Our Customers Say

The delivery company that sold me the safe would only leave it in the garage. Talmadge came out, measured the stair turn, brought the right gear and set it in the basement exactly where I wanted it. Then they anchored it and showed me the bolts.
Randall VossBasement install · Monument
They surveyed the floor first and told me the upstairs joists would not carry the unit I had picked. Nobody else mentioned that. They recommended a lighter model and a ground-floor spot, and it cost me less than the original plan.
Priya RamaswamySite survey · Briargate
Moved a nine-hundred pound safe across town for us with no damage to either house. Floors protected the whole way, doors off their hinges and put back, and the old anchor holes patched. Genuinely careful people.
Dean KowalczykRelocation · Old Colorado City
No Obligation

Not Sure What Your Floor Will Take?

Common Questions

Can you get a safe into a basement?

Usually, yes. It depends on the stair width, the turn at the landing and the headroom. That is exactly what the site survey establishes — and if it genuinely will not go, we will say so before you buy rather than after.

Do I really need it anchored?

Yes. An unanchored safe can be tipped onto a dolly and taken away whole. Anchoring is a small part of the cost and the single biggest factor in whether the safe protects anything.

Will anchoring damage my floor?

Anchors go through the safe base into the slab or joists, so the holes are hidden under the unit for its whole life. If the safe ever moves, the holes are patchable and we do that as part of a relocation.

Can you put a safe upstairs?

Sometimes. A loaded safe concentrates a lot of weight on a small footprint, so we check the span, the joist size and the direction before agreeing. We would rather recommend a lighter unit than sign off on something we are not sure about.

Do you move safes we did not install?

Yes, that is a large part of our work — house moves, room changes and estate clearances. We will survey it the same way and quote a fixed price.

What if I forget the combination?

Call us. For units we installed we hold the change records, and for others we can usually recover access without destroying the safe. Bring proof it is yours.